Product Details

 

Slurry storage tank volume: 100m³, external size: Φ6250×5820; Cylinder body:8mm; Runway plate 20mm, bottom flange 10mm, reinforcing ring 8# channel steel

Mixing device dimension: Φ2450*3880; Liner size:Φ6000*4500mm

The middle column Φ402*14 round tube (overall processing, to ensure coaxiality), mixing rack spindle Φ121*8 round tube, walking wheel of 45# steel after heat treatment, coated with a layer of 20mm thick polyurethane wheel, wheel width of 100mm.

Walking reducer(gear):R77-4.26-M1-YX3-100L1-4; Power:2.2kW; Traveling speed:50s/rad

Mixing reducer(gear):MDM149-94.6-M4-YX3-160L-4; Power:15kW; Stirring speed:15r/min.

 

 

Using laser ranging continuous liquid level meter, installation of liquid level high material level meter, interlocking control of slurry pump, and provide signals to the ball mill operating station and pouring floor operating station;

The driving structure of the traveling gear reducer is directly connected; Control the speed separately while ensuring adequate continuous torque;

The steel wheel coated with polyurethane reduces the wear and noise of the wheel to the runway and increases the service life of the runway and the friction force of the wheel;

There are harrow teeth under the mixer and at the bottom of the mixer tank to avoid slurry precipitation;

There is a temperature sensor in the middle of the slurry tank to meet the slurry heating function.

 

 

http://www.wdaacblockmachine.com/